Module lecteur RFID UHF VM-5S

Configuration with 2dbi 40*40mm ceramic antenna, the reading distance can reach more than 2 mètres, it is the best choice for the application integration of RFID reader development and application.

Les détails du produit

Tags du produit

caractéristiques du produit:

1.Using the most cost-effective Korean PR200 chip, the output power reaches 27dBm;

2.Ultra-low power consumption, wide temperature design;

3.Support compliance with ISO-18000-6C (EPC G2) protocol standard;

4.Working frequency 865-868MHZ, 902-928MHZ (can be adjusted according to different country or region requirements);

5.Configuration with 2dbi 40*40mm ceramic antenna, the reading distance can reach more than 2 mètres, it is the best choice for the application integration of RFID reader development and application.

 

Paramètres:

Specification Description
Model No. VM-5S
Performance
Gamme de fréquences 865-868MHZ,902-928MHZ(can be adjusted with different countries or regions)
Frequency modulation method Broad spectrum frequency modulation (FHSS) or fixed frequency, peut être réglé par logiciel
Sortie RF 18-27dBm réglable
Interface TTL Uart interface, Wiegand 26, Wiegand 34
GPIO 2 contributions 2 outputs (3.3V level)
Communication baud rate 115200 bps(default and recommended)、38400bps
Work area support U.S., Canada, and other regions that meet U.S. FCC certification standards;EU and other regions that comply with ETSI EN 302 208

Chine continentale, Japon, South Korea, Malaisie, Taïwan

Tag operation performance
Read and write distance Distance de lecture >250cm, write distance >20cm
Reading and writing time The average reading time per word (32bits) is 6ms, and the average writing time per word (32bits) is 50ms;
Protocole d'interface aérienne Classe UHF globale EPC 1 Gen 2/ISO-18000-6C
Inventory tag peak speed > 50pcs/second
Tag buffer 200pcs tags @ 96 bit EPC
Tag RSSI Soutien
Performance électrique mécanique
Working voltage DC 3.5-5V
Standby current <80mA (EN pin high level);
Sleep state current <100uA (EN Pin low level);
Operating current 260mA @ 3.5V (26 dBm Output,25°C)

110mA @ 3.5V (18 dBm Output,25°C)

Start time <100mS
Température de fonctionnement – 20 °C – + 70 °C
Température de stockage – 20 °C – + 85 °C
Cooling method Air cooling (no external heat sink required)

Application:

It can be widely used in UHF handhelds, tablets, card issuers, integrated reader , and printing terminals that need to embed small UHF modules. The module small size and low power consumption are the preferred choices for embedded RFID readers.

 

Emballage & livraison:

1.Emballage: en vrac dans le carton
2.Port de chargement: FOB Shenzhen
3.Délai de mise en œuvre: environ 1 semaine après confirmation de l'échantillon et dépôt reçu

 

Nos services:

1.Différents lecteurs RFID disponibles pour vos besoins
2.Le service OEM / ODM est disponible.
3.Nous avons un R fort&Équipe D, et peut vous apporter un support technologique sur les projets rfid.

Envoyez-nous votre message:

ENQUÊTE MAINTENANT
ENQUÊTE MAINTENANT