УВЧ-счытвальны модуль RFID VM-5S
Асаблівасці прадукту:
1.Using the most cost-effective Korean PR200 chip, the output power reaches 27dBm;
2.Ultra-low power consumption, wide temperature design;
3.Support compliance with ISO-18000-6C (EPC G2) protocol standard;
4.Working frequency 865-868MHZ, 902-928MHZ (can be adjusted according to different country or region requirements);
5.Configuration with 2dbi 40*40mm ceramic antenna, the reading distance can reach more than 2 meters, it is the best choice for the application integration of RFID reader development and application.
Параметры:
Specification Description | |
Model No. | VM-5S |
Performance | |
Frequency range | 865-868MHZ,902-928MHZ(can be adjusted with different countries or regions) |
Frequency modulation method | Broad spectrum frequency modulation (FHSS) or fixed frequency, can be set by software |
RF output | 18-27dBm adjustable |
Interface | TTL Uart interface, Wiegand 26, Wiegand 34 |
GPIO | 2 inputs 2 outputs (3.3V level) |
Communication baud rate | 115200 bps(default and recommended)、38400bps |
Work area support | U.S., Canada, and other regions that meet U.S. FCC certification standards;EU and other regions that comply with ETSI EN 302 208
Mainland China, Japan, South Korea, Malaysia, Taiwan |
Tag operation performance | |
Read and write distance | Чытанне адлегласці >250cm, write distance >20cm |
Reading and writing time | The average reading time per word (32bits) is 6ms, and the average writing time per word (32bits) is 50ms; |
Air interface protocol | EPC global UHF Class 1 Gen 2/ISO-18000-6C |
Inventory tag peak speed | > 50pcs/second |
Tag buffer | 200pcs tags @ 96 bit EPC |
Tag RSSI | Support |
Mechanical electrical performance | |
Working voltage | DC 3.5-5V |
Standby current | <80мА (EN pin high level); |
Sleep state current | <100uA (EN Pin low level); |
Operating current | 260mA @ 3.5V (26 dBm Output,25°C)
110mA @ 3.5V (18 dBm Output,25°C) |
Start time | <100mS |
Працоўная тэмпература | – 20 °C – + 70 °C |
Storage temperature | – 20 °C – + 85 °C |
Cooling method | Air cooling (no external heat sink required) |
Ужыванне:
It can be widely used in UHF handhelds, tablets, card issuers, integrated reader , and printing terminals that need to embed small UHF modules. The module small size and low power consumption are the preferred choices for embedded RFID readers.
Упакоўка & Дастаўка:
1.Упакоўка: навала ў кардоннай скрынцы
2.Порт загрузкі: FOB Шэньчжэнь
3.Час выканання: каля 1 тыдня пасля ўзору пацверджана і дэпазіт атрыманы
Нашы паслугі:
1.Даступныя розныя RFID-счытвальнікі для вашых патрэб
2.Даступная паслуга OEM / ODM.
3.У нас моцны R&D каманда, і можа даць вам тэхналагічную падтрымку праектаў RFID.
Адпраўце нам сваё паведамленне:
